Maintenance method of automatic frying machine
Fully automatic frying machine is made of 304 stainless steel. It is equipped with automatic temperature control, explosion formulation, automatic slag removal, circulating filtration system, cleaning convenience, automatic oil filling, equipped with leakage protection, temperature abnormal protection and alarm, heating mode can choose electric heating, liquefied petroleum gas, natural gas, coal or thermal oil boiler; It has changed the structure of traditional frying machine, solved the drawbacks of traditional mesin penggorengan, such as not zoning temperature control, not automatically filtering residue, and realized automatic operation. At the same time, it has greatly improved the quality of products, and has outstanding performance in environmental protection, energy saving, fuel saving, health and so on. It has been praised as "the revolution of mesin penggorengan" by the industry.
The automatic mesin penggorengan is installed horizontally when it is used, the liquid level is higher than 10 mm above the surface of the tube, which prevents heating (air burning) in the air, causing the electric heat pipe to be too high temperature, causing premature breakage of the line; for long-term use, it is necessary to clean up the scale, carbide and its adherent accumulation material on the surface of the electric heat pipe from time to time, to prevent heat accumulation and corrosion of the tube surface inside the electric heat pipe; According to different heating medium, choose suitable shell material to ensure service life. Next, shuliy machinery will introduce the maintenance method of the automatic mesin penggorengan.
1, the heating tube will take some time when it is used for a period of time. It should be cleaned in time and cleaned at least four times a month.
- Clean up the residue on the surface of the fryer in time. The residue should not accumulate too much or too thick to prevent the heat stored in the residue from causing fire.
- Full automatic frying function must be refueling in the furnace before electric power is needed to avoid damaging the electric heating tube.